Common Milkweed Seeds
|Zones||3 - 8|
|Mature Plant Size||30-60" tall|
|Zones||3 - 8|
|Mature Plant Size||30-60" tall|
Common Milkweed (Asclepias syriaca) is a handsome, straight plant you see in every farm field and growing wherever a roadside hasn't been mowed. Leaves are glossy and thick, and the blooms are large, rounded clusters of purplish/pink flowers atop plants that range from 2 to 5 ft. It's native in the US from Canada to Georgia, and west to Texas.
The botanical name, "Asclepias"; is after Aesclepios, the Greek God of medicine, since this plant has been used as a medicinal since ancient times. "Milkweed" derives from the fact that when you break a stem, sticky white sap immediately appears. Common Milkweed is one of our commonest "weeds," but one almost all wildflower gardeners want.
This is the plant famous for its "silky seeds" in fall, when you see the drying cone-shaped seedpods crack open and their snow-white shiny fluff flying around the meadow. This is the dispersal mechanism for the large shiny seeds of common milkweed. Every kid loves to blow them away in fall, like dandelion seeds in spring.
Even though farmers hate milkweed, you'll love it in your wildflower garden...for two reasons. It's beautiful and dependably perennial, and it's the No. 1 plant visited by Monarch butterflies on their famous migration south every summer and fall. In fact, during late summer, it's somewhat rare to see a milkweed plant without a monarch perched upon the flowers, making it the No. 1 butterfly magnet among our wildflowers. ("Butterfly Weed" is a close relative, with bright orange flowers.)
Native Range for Asclepias syriaca (Common Milkweed) - AL, AR, CT, DC, DE, GA, IA, IL, IN, KS, KY, LA, MA, MD, ME, MI, MN, MO, MS, MT, NC, ND, NE, NH, NJ, NY, OH, OK, OR, PA, RI, SC, SD, TN, TX, VA, VT, WI, WV.
AM013039 (1 Ounce)
AM013041 (1/4 Pound)
Full Sun, Half Sun / Half Shade
|Wildflower Mix or Specie|
Northeast, Southeast, Midwest, West, Southwest, Pacific Northwest
3, 4, 5, 6, 7, 8
Yes - Learn More
Native to most of North America east of the Rocky Mountains.
|Seeds Per Pound|
|Seeds Per Packet|
approx. 50 seeds per packet
packet covers 5-10 sq. ft.
1/4 lb covers 1,075 sq. ft.
Sandy Soil, Clay Soil
Average, Well Draining
Attract Butterflies, Attract Hummingbirds, Bee Friendly, Deer Resistant, Rabbit Resistant, Native, Low Maintenance, Fragrant Flower / Foliage, Good For Containers, Great For Mass Plantings, Multiplies / Naturalizes, Good For Erosion Control
|Ships to Hawaii, Alaska & Canada|
Germination: To start Milkweed seed we recommend starting inside, but before this happens Milkweed seeds need to go through a cold stratification period. Cold stratification is very important for the germination and growth of Milkweed. It helps break the seeds natural dormancy cycle. To do this, we recommend placing Milkweed seed in a damp paper towel or damp sand in a zip lock bag and place in your fridge for 3 – 6 weeks (30 days). Place in an area of the fridge, where it won’t get damaged. We taped ours to the bottom of a refrigerator shelf.
Planting In Spring: Once the 30 days are complete, it’s time to plant the cold stratified Milkweed (asclepias) seeds. We recommend planting in 2-4” peat pots. Fill peat pots ¾ of the way with seed starting potting soil and gently add water. Water should be able to drain through the peat pots. Once the soil is damp, place 1-2 cold stratified seeds into each pot. To finish, place 1/4 inch of soil on top of the seed.
Planting In Fall: If you're planting Milkweed seed in the fall, let nature do the cold stratification for you! There is no need to place your seeds in the refrigerator before planting, you can plant seeds directly into the soil after there have been a few frosts in your area. This allows for the seeds to remain dormant for the winter and come up in the early spring. Clear away any existing growth and using your index finger to measure, create 1.5" holes for each Milkweed seed. We recommend spacing seeds about 4-6” apart. Place a seed in each hole and cover. Water thoroughly.
Watering: Gently water the planted seed to give additional hydration. The best way to water is from the bottom up. Use a flat pan under the peat pots and add a half inch of water to the bottom of the tray. Don’t over water as it can cause fungus. Water every day or every other day as needed, the best way to test the soil dampness is to touch it. If the soil seems dry then add water; if it’s wet, wait for the soil to dry out to water.
Light Requirements: For the next few weeks, make sure the Milkweed is either in a sunny window, in a green house or under a grow light. Milkweed needs lots of sun and warmth to grow. If you’re using a grow light, make sure to lower the bulb closer to the pots or your seedlings may become leggy, as they stretch to the light. In our experiment, this happened to us. Ideally a sturdier stem is better. Cold stratified seeds should germinate and sprout within 10-15 days once planted. In total Milkweed from the day they are cold stratified to growth can take 40 plus days, so be patient!
Other planting options: Place dry seed (not stratified) in seed starting soil and plant in peat pots under a grow light or in a greenhouse to germinate seeds. The success rate for this is low and more difficult to accomplish. If you choose to use this option it can take months for the seeds to germinate.
If you are planting seed outside, we suggest seeding in late fall, and let the Milkweed seed lay on the ground through winter. Milkweed seed will have a long winter of dormancy, so once the sun comes out and the ground warms in the spring, the seeds will germinate on their own.
Where to Plant: Milkweed does well in open areas with full sunlight exposure areas like fields, parks, cultivated gardens, roadsides, highway medians, and road sides. We suggest transplanting Milkweed when the plant is no larger than 3 inches tall. In most cases in transplanting, the Milkweed plant will go though some shock and could lose all its leaves. This happens, don’t panic. The plant is trying to establish its roots and will eventually grow leaves again. This is the main reason we suggest planting seeds in peat pots, because Milkweed roots are very sensitive. Peat Pots breakdown over time in the ground, which allows the milkweed roots to grows without being disrupted. We found this to be the best way to transplant. If you decide to plant in plastic containers, but make sure it’s deep enough for roots to grow. If you receive a plant already grown in plastic, be careful to take out the plant and not disturb the roots.
When to plant: Soil moisture and temperature are very important when growing Milkweed. The best time to plant Milkweed is in early spring after the danger of frost has passed. If you plant seeds late in the spring, the seeds may not grow due toCommon Milkweed Field Grown germination time and temperature. Common Milkweed seed doesn’t germinate over 85 degrees.
Once your seedling is planted, water it for a few days to get it established, but after that, the plant doesn’t need a lot of supplemental water. Only water if you have an unusual dry spell. Peat pots are nice to use, but you need to be sure there is no top edge above the soil line after transplanting. In dry climates, this will wick away valuable soil moisture. A small 2 1/2″ diameter x 3 in. deep pot is ideal. Asclepias are somewhat finicky native plants. So minimizing the time growing in a pot and transplanting them as young plants is the best approach.